ढाँचा:Infobox dam
यस ढाँचाले स्वचालित रूपमा उत्पन्न छोटो विवरण थप्दछ। |
यो ढाँचाले लुआ प्रयोग गर्दछ: |
Usage
सम्पादन गर्नुहोस्Use the following infobox for all types of hydroelectric power stations involving dams, including pumped-storage. For all types of wave and tidal power stations, as well as all other types of power stations, please use {{Infobox power station}}.
{{{name}}} | |
---|---|
आधिकारिक नाम | {{{name_official}}} |
देश | {{{country}}} |
स्थान | {{{location}}} |
निर्देशाङ्क | ०°N ०°E / ०°N ०°E |
उद्देश्य | {{{purpose}}} |
स्थिति | {{{status}}} |
निर्माण आरम्भ | {{{construction_began}}} |
उदघाटन मिति | {{{opening}}} |
बन्द मिति | {{{demolished}}} |
निर्माण लागत | {{{cost}}} |
निर्माणकर्ता | {{{builder}}} |
डिजाइनकर्ता | {{{designed_by}}} |
मालिक(हरू) | {{{owner}}} |
सञ्चालक(हरू) | {{{operator}}} |
Upper dam and spillways | |
बाँधको प्रकार | {{{dam_type}}} |
पानीको स्रोत | {{{dam_crosses}}} |
उचाइ (सतह) | {{{dam_height_foundation}}} |
उचाइ (जोड्ने विन्दु) | {{{dam_height_thalweg}}} |
लम्बाइ | {{{dam_length}}} |
शिखरको अवनति | {{{dam_elevation_crest}}} |
चौडाइ (शिखर) | {{{dam_width_crest}}} |
चौडाइ (सतह) | {{{dam_width_base}}} |
बाँध आयतन | {{{dam_volume}}} |
Spillways | {{{spillway_count}}} |
Spillway type | {{{spillway_type}}} |
Spillway length | {{{spillway_length}}} |
Spillway capacity | {{{spillway_capacity}}} |
Spillway volumetric flow rate | {{{spillway_volumetric_flow_rate}}} |
Spillway type | {{{spillway_type2}}} |
Spillway length | {{{spillway_length2}}} |
Spillway capacity | {{{spillway_capacity2}}} |
Spillway volumetric flow rate | {{{spillway_volumetric_flow_rate2}}} |
Spillway type | {{{spillway_type3}}} |
Spillway length | {{{spillway_length3}}} |
Spillway capacity | {{{spillway_capacity3}}} |
Spillway volumetric flow rate | {{{spillway_volumetric_flow_rate3}}} |
Upper reservoir | |
Creates | {{{res_name}}} |
कुल क्षमता | {{{res_capacity_total}}} |
Active capacity | {{{res_capacity_active}}} |
Inactive capacity | {{{res_capacity_inactive}}} |
जलग्रह क्षेत्र | {{{res_catchment}}} |
Surface area | {{{res_surface}}} |
Maximum length | {{{res_max_length}}} |
Maximum width | {{{res_max_width}}} |
Maximum water depth | {{{res_max_depth}}} |
Normal elevation | {{{res_elevation}}} |
Tidal range | {{{res_tidal_range}}} |
Lower dam and spillways | |
Type of dam | {{{lower_dam_type}}} |
Impounds | {{{lower_dam_crosses}}} |
Height (foundation) | {{{lower_dam_height_foundation}}} |
Height (thalweg) | {{{lower_dam_height_thalweg}}} |
Length | {{{lower_dam_length}}} |
Elevation at crest | {{{lower_dam_elevation_crest}}} |
Width (crest) | {{{lower_dam_width_crest}}} |
Width (base) | {{{lower_dam_width_base}}} |
Dam volume | {{{lower_dam_volume}}} |
Spillways | {{{lower_spillway_count}}} |
Spillway type | {{{lower_spillway_type}}} |
Spillway length | {{{lower_spillway_length}}} |
Spillway capacity | {{{lower_spillway_capacity}}} |
Spillway volumetric flow rate | {{{lower_spillway_volumetric_flow_rate}}} |
Spillway type | {{{lower_spillway_type2}}} |
Spillway length | {{{lower_spillway_length2}}} |
Spillway capacity | {{{lower_spillway_capacity2}}} |
Spillway volumetric flow rate | {{{lower_spillway_volumetric_flow_rate2}}} |
Spillway type | {{{lower_spillway_type3}}} |
Spillway length | {{{lower_spillway_length3}}} |
Spillway capacity | {{{lower_spillway_capacity3}}} |
Spillway volumetric flow rate | {{{lower_spillway_volumetric_flow_rate3}}} |
Lower reservoir | |
Creates | {{{lower_res_name}}} |
Total capacity | {{{lower_res_capacity_total}}} |
Active capacity | {{{lower_res_capacity_active}}} |
Inactive capacity | {{{lower_res_capacity_inactive}}} |
Catchment area | {{{lower_res_catchment}}} |
Surface area | {{{lower_res_surface}}} |
Maximum length | {{{lower_res_max_length}}} |
Maximum width | {{{lower_res_max_width}}} |
Maximum water depth | {{{lower_res_max_depth}}} |
Normal elevation | {{{lower_res_elevation}}} |
Tidal range | {{{lower_res_tidal_range}}} |
{{{plant_name}}} | |
निर्देशाङ्क | १°१′१″उ॰ १°१′१″पू॰ / १.०१६९४°N १.०१६९४°E |
Operator(s) | {{{plant_operator}}} |
सुरुवात मिति | {{{plant_commission}}} |
Decommission date | {{{plant_decommission}}} |
प्रकार | {{{plant_type}}} |
पानीको चाँप | {{{plant_hydraulic_head}}} |
टर्बाइन | {{{plant_turbines}}} |
Pump-generators | {{{plant_pumpgenerators}}} |
Pumps | {{{plant_pumps}}} |
क्षमता | {{{plant_capacity}}} |
Capacity factor | {{{plant_capacity_factor}}} |
Overall efficiency | {{{plant_efficiency}}} |
Storage capacity | {{{plant_storage_hours}}} |
वार्षिक उत्पादन | {{{plant_annual_gen}}} |
Website {{{website}}} | |
{{{extra}}} |
{{Infobox dam | name = | name_official = | image = | image_size = | image_caption = | image_alt = | location_map = | location_map_size = | location_map_caption = | location_map_alt = | coordinates = <!-- {{coord|..|..|type:landmark|display=inline,title}}--> | country = | location = | purpose = | status = | construction_began = | opening = | demolished = | cost = | builder = | designed_by = | owner = | operator = | dam_type = | dam_crosses = | dam_height_foundation = | dam_height_thalweg = | dam_length = | dam_elevation_crest = | dam_width_crest = | dam_width_base = | dam_volume = | spillway_count = | spillway_type = | spillway_length = | spillway_capacity = | spillway_volumetric_flow_rate = | spillway_type2 = | spillway_length2 = | spillway_capacity2 = | spillway_volumetric_flow_rate2 = | spillway_type3 = | spillway_length3 = | spillway_capacity3 = | spillway_volumetric_flow_rate3 = | res_name = | res_capacity_total = | res_capacity_active = | res_capacity_inactive = | res_catchment = | res_surface = | res_max_length = | res_max_width = | res_max_depth = | res_elevation = | res_tidal_range = | lower_dam_type = | lower_dam_crosses = | lower_dam_height_foundation = | lower_dam_height_thalweg = | lower_dam_length = | lower_dam_elevation_crest = | lower_dam_width_crest = | lower_dam_width_base = | lower_dam_volume = | lower_spillway_count = | lower_spillway_type = | lower_spillway_length = | lower_spillway_capacity = | lower_spillway_volumetric_flow_rate = | lower_spillway_type2 = | lower_spillway_length2 = | lower_spillway_capacity2 = | lower_spillway_volumetric_flow_rate2 = | lower_spillway_type3 = | lower_spillway_length3 = | lower_spillway_capacity3 = | lower_spillway_volumetric_flow_rate3 = | lower_res_name = | lower_res_capacity_total = | lower_res_capacity_active = | lower_res_capacity_inactive = | lower_res_catchment = | lower_res_surface = | lower_res_max_length = | lower_res_max_width = | lower_res_max_depth = | lower_res_elevation = | lower_res_tidal_range = | plant_name = | plant_coordinates = <!-- {{coord|..|..|type:landmark|display=inline}}--> | plant_operator = | plant_commission = | plant_decommission = | plant_type = | plant_hydraulic_head = | plant_turbines = | plant_pumpgenerators = | plant_pumps = | plant_capacity = | plant_capacity_factor = | plant_efficiency = | plant_storage_hours = | plant_annual_gen = | plant_annual_gen_year = | website = | extra = }}
Parameter names and descriptions
सम्पादन गर्नुहोस्Parameter name | Description |
---|---|
name | Name of dam. |
name_official | Official name, if different from name. Preferably in native language. |
image | Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed. |
image_size | Value to overrides the default 250px. |
image_caption | Caption beneath image. |
image_alt | Alternative text for image. |
location_map | Name of a location map file. The coordinates must be specified as well (see below). |
location_map_size | Value to overrides the default 250px. |
location_map_caption | Caption beneath location map. |
location_map_alt | Alternative text for location map. |
coordinates | Geographic coordinates using {{coord}}. See here for more details. Remember to avoid being overly precise. |
country | Country where the facility is located. Do not use flag icons. |
location | General area where located. Avoid being overly-detailed. |
purpose | Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose . Field codes: F =Flood control, I =Irrigation, N =Navigation, P =Power, W =Water supply.
|
status | Current status of the project. Enter any one of the following auto-expanding fields:D =Decommissioned, O =Operational, P =Proposed, UC =Under construction.
|
construction_began | Date construction began, consider using {{Start date}}. |
opening | Date, or future date, of inauguration. Consider using {{Start date}}. |
demolished | Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}. |
cost | Total cost of development. |
builder | Builder(s) of the dam. |
owner | Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: Owner1: 60% <br/>Owner2: 40%
|
designed_by | Designers of the dam. |
operator | Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam. |
dam_type | Type of dam. Enter any one of the following auto-expanding fields: A =Arch dam, B =Barrage, E =Embankment dam, F =Earth-fill dam, G =Gravity dam, H =Rock-fill dam,AG =Arch-gravity dam.
|
dam_crosses | Body of river or stream below dam |
dam_height | Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
|
dam_height_foundation | Height over foundation bed, with metric conversions. |
dam_height_thalweg | Height over thalweg (riverbed), with metric conversions. |
dam_length | Length of dam crown, with metric conversions. |
dam_elevation_crest | Height of the dam's crest above sea level, with metric conversions. |
dam_width_crest | Width at crest of dam, with metric conversions. |
dam_width_base | Width at base of dam, with metric conversions. |
dam_volume | Volume of material in the dam structure. |
spillway_count | Number of spillways. |
spillway_type | Type of spillway. |
spillway_length | Length of spillway. |
spillway_capacity | Capacity of spillway. |
spillway_volumetric_flow_rate | Spillway volumetric flow rate. |
spillway_type2 | Type of 2nd spillway. |
spillway_length2 | Length of 2nd spillway. |
spillway_capacity2 | Capacity of 2nd spillway. |
spillway_volumetric_flow_rate2 | 2nd Spillway volumetric flow rate. |
spillway_type3 | Type of 3rd spillway. |
spillway_length3 | Length of 3rd spillway. |
spillway_capacity3 | Capacity of 3rd spillway. |
spillway_volumetric_flow_rate3 | 3rd Spillway volumetric flow rate. |
res_name | Name of upstream body of water, if different than "dam_crosses". |
res_capacity_total | Capacity of reservoir, i.e. megalitres. |
res_capacity_active | The active, live or useful capacity (storage) of the reservoir. |
res_capacity_inactive | The inactive or dead capacity (storage) of the reservoir. |
res_catchment | Area of catchment for reservoir. |
res_surface | Surface area (top water level) of reservoir. |
res_max_length | Length of the reservoir at normal levels, with metric conversions. |
res_max_width | Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions. |
res_max_depth | Maximum water depth of reservoir. |
res_elevation | The reservoir's height above sea level at normal levels, with metric conversions. |
res_tidal_range | Tidal range, if applicable. |
plant_name | Name of plant, if applicable. |
plant_coordinates | Geographic coordinates of the power station using {{coord}}. See here for more details. Remember to avoid being overly precise. |
plant_operator | Operator(s) of the hydroelectric power plant. |
plant_commission | Power plant commissioning date. May be different than dam opening date. |
plant_decommission | Power plant decommissioning date. May be different than dam closing date. |
plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C =Conventional, P =Pumped-storage, R =Run-of-the-river, T =Tidal barrage.
|
plant_hydraulic_head | Hydraulic head at power station. |
plant_turbines | Number of turbines, with respective rated capacity. Exclude any reversible turbine-generators (pump/generators) and pumps from this — it should only contain conventional generation-only turbines. |
plant_pumpgenerators | Number of reversible turbine-generators (pump/generators), with respective rated capacity. For pumped storage plants only. |
plant_pumps | Number of pumps, with respective rated capacity. For pumped storage plants only. |
plant_capacity | Current installed capacity in megawatts, or planned capacity for those under development. For plants which are operational, but have additional capacity under development, please use only the current installed capacity. |
plant_capacity_factor | Capacity factor of the power station, in percentage. For pumped storage, please try to rely solely on third-party sources, as manual capacity factor calculations are overly complex for PSH and their results do not align with figures in (authoritative) third-party sources. |
plant_efficiency | Overall efficiency of the power station, in percentage. Generally only applicable to pumped storage. |
plant_storage_hours | Storage capacity of the power station, in hours (if desired, you can also provide calculated or actual GWh figures in parenthesis). Generally only applicable to pumped storage. |
plant_annual_gen | Average annual power generation. To be used in combination with the following plant_annual_gen_year parameter. GW·h suffix will auto added for number without unit or any text appended.
|
plant_annual_gen_year | Given generation value exact description. If no description is given, it will default to Annual (i.e. it will expand to Annual generation). Enter following text:
|
website | Raw wikitext for entering website(s). Use [brackets] where appropriate |
extras | Free form, spans both columns. Use sparingly. |
Coordinates
सम्पादन गर्नुहोस्The coordinates should be specified using coordinates – with a {{coord}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.
Microformat
सम्पादन गर्नुहोस्The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
If the place or venue has an "established", "founded", "opened" or similar date, use {{Start date}} (unless the date is before 1583 CE).
If it has a URL, use {{URL}}.
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes; nor collapse nested elements which use them.
When giving coordinates, please don't be overly precise.
Tracking category
सम्पादन गर्नुहोस्See also
सम्पादन गर्नुहोस्ढाँचा:Buildings and structures infobox templates
TemplateData
सम्पादन गर्नुहोस्Infobox damको कागजात
Infobox for a dam
मापदण्ड | विवरण | प्रकार | स्थिति | |
---|---|---|---|---|
Name | name | Name of dam | String | वैकल्पिक |
Official name | name_official | Official name, if different from name. Preferably in native language. | String | वैकल्पिक |
Image caption | image_caption | Caption beneath image. | String | वैकल्पिक |
Image alternative text | image_alt | Alternative text for image. | String | वैकल्पिक |
Location map caption | location_map_caption | Caption beneath location map. | String | वैकल्पिक |
Location map alternative text | location_map_alt | Alternative text for location map. | String | वैकल्पिक |
coordinates | coordinates | Geographic coordinates using the coord template | String | वैकल्पिक |
Country | country | Country where the facility is located. Do not use flag icons. | String | वैकल्पिक |
Location | location | General area where located. Avoid being overly-detailed. | String | वैकल्पिक |
Purpose | purpose | Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, N=Navigation, P=Power. | String | वैकल्पिक |
Status | status | Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction. | String | वैकल्पिक |
Construction began | construction_began | Date construction began, consider using {{Start date}}. | String | वैकल्पिक |
Opening date | opening | Date, or future date, of inauguration. Consider using {{Start date}}. | String | वैकल्पिक |
Demolished date | demolished | Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}. | String | वैकल्पिक |
Cost | cost | Total cost of development. | String | वैकल्पिक |
Owner | owner | Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible.
| String | वैकल्पिक |
Operator | operator | Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam. | String | वैकल्पिक |
Dam type | dam_type | Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam. | String | वैकल्पिक |
Dam crosses | dam_crosses | Body of river or stream below dam | String | वैकल्पिक |
Dam height over foundation | dam_height_foundation | Height over foundation bed, with metric conversions. | String | वैकल्पिक |
Dam height over thalweg | dam_height_thalweg | Height over thalweg (riverbed), with metric conversions. | String | वैकल्पिक |
Dam length | dam_length | Length of dam crown, with metric conversions. | String | वैकल्पिक |
Dam elevation crest | dam_elevation_crest | Height of the dam's crest above sea level, with metric conversions. | String | वैकल्पिक |
Dam width crest | dam_width_crest | Width at crest of dam, with metric conversions. | String | वैकल्पिक |
Dam width at base | dam_width_base | Width at base of dam, with metric conversions. | String | वैकल्पिक |
Dam volume | dam_volume | Volume of material in the dam structure. | String | वैकल्पिक |
Spillway count | spillway_count | Number of spillways. | सङ्ख्या | वैकल्पिक |
Spillway type | spillway_type | Type of spillway. | String | वैकल्पिक |
Spillway capacity | spillway_capacity | Capacity of spillway. | String | वैकल्पिक |
Reservoir name | res_name | Name of upstream body of water, if different than "dam_crosses". | String | वैकल्पिक |
Reservoir capacity | res_capacity_total | Capacity of reservoir, i.e. megalitres. | String | वैकल्पिक |
Reservoir active capacity | res_capacity_active | The active, live or useful capacity (storage) of the reservoir. | String | वैकल्पिक |
Reservoir inactive capacity | res_capacity_inactive | The inactive or dead capacity (storage) of the reservoir. | String | वैकल्पिक |
Reservoir catchment area | res_catchment | Area of catchment for reservoir. | String | वैकल्पिक |
Reservoir surface area | res_surface | Surface area (top water level) of reservoir. | String | वैकल्पिक |
Reservoir maximum length | res_max_length | Length of the reservoir at normal levels, with metric conversions. | String | वैकल्पिक |
Reservoir maximum width | res_max_width | Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions. | String | वैकल्पिक |
Reservoir maximum depth | res_max_depth | Maximum water depth of reservoir. | String | वैकल्पिक |
Reservoir elevation | res_elevation | The reservoir's height above sea level at normal levels, with metric conversions. | String | वैकल्पिक |
Reservoir tidal range | res_tidal_range | Tidal range, if applicable. | String | वैकल्पिक |
Plant name | plant_name | Name of plant, if applicable. | String | वैकल्पिक |
Plant operator | plant_operator | Operator(s) of the hydroelectric power plant. | String | वैकल्पिक |
Plant coordinates | plant coordinates | Geographic coordinates of the power station using the coord template | String | वैकल्पिक |
Plant commissioning date | plant_commission | Power plant commissioning date. May be different than dam opening date. | String | वैकल्पिक |
Plant decommissioning date | plant_decommission | Power plant decommissioning date. May be different than dam closing date. | String | वैकल्पिक |
Plant type | plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage. | String | वैकल्पिक |
Plant hydraulic head | plant_hydraulic_head | Hydraulic head at power station. | String | वैकल्पिक |
Plant turbine count/capacity | plant_turbines | Number of turbines, with respective rated capacity. | String | वैकल्पिक |
Plant generation capacity | plant_capacity | Installed generation capacity, measured in megawatts (MW). | String | वैकल्पिक |
Plant capacity factor | plant_capacity_factor | Capacity factor of the power station, in percentage. | String | वैकल्पिक |
Plant annual power generation | plant_annual_gen | Average annual power generation of the previous year. Measured in gigawatt-hours (GWh) | String | वैकल्पिक |
Website | website | Raw wikitext for entering website(s). Use [brackets] where appropriate | सामग्री | वैकल्पिक |
Extra data | extra | Free form, spans both columns. Use sparingly. | String | वैकल्पिक |